The aluminum honeycomb panel is a sheet made of two aluminum sheets firmly bonded to both sides of a thick honeycomb core material. Applicable to civil buildings, car and boat decoration, etc., is the application of aviation and aerospace materials in the field of civil construction.
The whole processing process of aluminum honeycomb panels is completed in a modern factory. The hot press forming technology is used. Due to the high heat transfer value between the aluminum skin and the honeycomb, the thermal expansion and contraction of the inner and outer aluminum skins are synchronized; the honeycomb aluminum skin has small holes to make the inside of the plate. The gas can flow freely; the slidable mounting buckle system does not cause structural deformation during thermal expansion and contraction. Honeycomb panels have the following characteristics: thermal insulation, and the melting point of aluminum is as high as 660 ° C, so when the fire occurs, neither the surface aluminum nor the middle aluminum honeycomb core will burn. Corrosion-resistant, pressure-bearing, aluminum honeycomb panels have high-strength pressure-bearing capacity, sound absorption, environmental protection, and various colors.
1. Light weight, energy saving, can greatly reduce the load of objects, easy to install, maintain and recyclable;
The aluminum honeycomb core has the same rigidity as the aluminum plate and the steel plate, and its weight is only 1/5 of the aluminum plate and 1/10 of the steel plate. The total thickness is 10mm, the thickness of the aluminum surface is 0.5mm, and the aluminum honeycomb plate with 0.5mm bottom aluminum is only about 3kg per square meter. Compared with the traditional thickness of the external wall, the total thickness is 4mm, the thickness of the aluminum surface is 0.5mm, and the thickness of the bottom aluminum is 0. light weight aluminum plate 5m m, 2kg, but rigid aluminum plate exceeds 2 times, comparable with 4mm thick aluminum veneer its cost significantly higher than the aluminum plate, aluminum veneer, effectively save material.
2. High strength, good rigidity, not easy to deform, and large load;
The dry honeycomb core is placed outside the vertical force state, and each plate has an infinite number of fixed honeycombs, which will not move, thus making the plate itself extremely stable, and maintaining its shape even if it is impacted by external forces. Not easy to change.
3, good sound insulation, heat preservation, heat insulation, moisture, fire prevention, non-toxic, environmental protection;
Because the honeycomb cores are sealed outside the honeycomb, the air flow is prevented, so that the sound waves and heat are effectively hindered, so that the sound propagation and thermal conductivity of the plate are greatly reduced, so that the sound insulation, heat preservation and heat insulation can be performed. Thereby saving materials for heat preservation and heat insulation.